Circulation Pump Head & Power Calculator | Muhendis Portal

Calculate circulation pump flow rate, head (m), hydraulic power, shaft power and recommended IEC standard electric motor size (kW).

Verified Engineering Calculation Engine

Engineered for mechanical, HVAC, piping, and design engineers in compliance with international standards (ISO, DIN, EN, ASME, ASHRAE). Load the interactive tool for real-time calculations and automated reports.

Centrifugal Pump Flow Rate, Head & Required Motor Power Reference Chart

Calculated hydraulic power (Ph), shaft power (Pm at ηp=70%), and standard IEC motor frame rating.

Flow Rate Q (m³/h)Total Head Hm (m)Hydraulic Power Ph (kW)Shaft Power Pm (kW)Recommended IEC Motor (kW)
5 m³/h20 m0.27 kW0.39 kW0.55 kW
10 m³/h25 m0.68 kW0.97 kW1.10 kW
20 m³/h30 m1.63 kW2.34 kW3.00 kW
30 m³/h40 m3.27 kW4.67 kW5.50 kW
50 m³/h45 m6.13 kW8.76 kW11.00 kW
100 m³/h50 m13.62 kW19.46 kW22.00 kW

Frequently Asked Questions (FAQ)

How is pump hydraulic power calculated?

Hydraulic power is calculated using Ph (kW) = (density × g × flow rate × head) / 3,600,000, representing the net energy delivered directly to the fluid.

What is pump head (Hm)?

Pump head represents the total mechanical resistance (pipe friction, fittings, valves and elevation) that the pump must overcome to circulate the fluid.

Related Technical Guides