How is parallel key size determined?
Key width and height are strictly governed by shaft diameter in DIN 6885-1. Key length is sized based on allowable surface contact pressure and shear stress.
Determine metric parallel key dimensions (width, height, length) and keyway depth according to DIN 6885 standard based on shaft diameter.
Engineered for mechanical, HVAC, piping, and design engineers in compliance with international standards (ISO, DIN, EN, ASME, ASHRAE). Load the interactive tool for real-time calculations and automated reports.
Key width (b), key height (h), shaft keyway depth (t₁), and hub keyway depth (t₂) by shaft diameter range.
| Shaft Dia d (mm) | Key Size b × h (mm) | Width b (mm) | Height h (mm) | Shaft Depth t₁ (mm) | Hub Depth t₂ (mm) |
|---|---|---|---|---|---|
| 10 – 12 | 4 × 4 | 4 | 4 | 2.5 | 1.8 |
| 12 – 17 | 5 × 5 | 5 | 5 | 3.0 | 2.3 |
| 17 – 22 | 6 × 6 | 6 | 6 | 3.5 | 2.8 |
| 22 – 30 | 8 × 7 | 8 | 7 | 4.0 | 3.3 |
| 30 – 38 | 10 × 8 | 10 | 8 | 5.0 | 3.3 |
| 38 – 44 | 12 × 8 | 12 | 8 | 5.0 | 3.3 |
| 44 – 50 | 14 × 9 | 14 | 9 | 5.5 | 3.8 |
| 50 – 58 | 16 × 10 | 16 | 10 | 6.0 | 4.3 |
Key width and height are strictly governed by shaft diameter in DIN 6885-1. Key length is sized based on allowable surface contact pressure and shear stress.