ISO Fits and Tolerances Calculator (ISO 286) | Muhendis Portal

Calculate hole and shaft tolerance limits (H7, g6, etc.), clearances, interferences, and fit types according to ISO 286 standards.

Verified Engineering Calculation Engine

Engineered for mechanical, HVAC, piping, and design engineers in compliance with international standards (ISO, DIN, EN, ASME, ASHRAE). Load the interactive tool for real-time calculations and automated reports.

ISO 286-1 Standard Hole-Basis Limits & Fits Chart (Ø25 mm Reference)

Upper and lower deviations (µm), clearance/interference range, and typical mechanical applications for Ø25 mm H7 hole fits.

Fit DesignationFit TypeHole Dev. (µm)Shaft Dev. (µm)Clearance / Interference (µm)Typical Engineering Application
H7 / f7Close Running Fit+21 / 0-20 / -41+20 to +62 ClearanceJournal bearings, gearbox bushings
H7 / g6Precision Sliding Fit+21 / 0-7 / -20+7 to +41 ClearancePrecision guide pins, clutch sleeves
H7 / h6Locational Clearance+21 / 00 / -130 to +34 ClearanceHand-assembled pulleys, couplings, collars
H7 / k6Transition Fit+21 / 0+15 / +2-15 Interf. / +19 Clear.Ball bearing inner rings, keyed gears
H7 / m6Tight Transition Fit+21 / 0+21 / +8-21 Interf. / +13 Clear.Lightly driven gears and fixed bushings
H7 / p6Light Press Fit+21 / 0+35 / +22-1 to -35 InterferenceBronze bushings, press-fitted hubs
H7 / s6Heavy Shrink Fit+21 / 0+48 / +35-14 to -48 InterferenceThermal shrink-fitted heavy duty wheels

Frequently Asked Questions (FAQ)

What is an H7/g6 fit?

H7/g6 is a precision clearance fit with small clearance, widely used for machine parts requiring accurate guidance without noticeable play.

Related Technical Guides