Pressure Vessel Dished Head Calculator | Muhendis Portal

Calculate required blank diameter, surface area and formed volume for torispherical (Klöpper / Korbbogen) and ellipsoidal heads per ASME VIII & DIN 28011.

Verified Engineering Calculation Engine

Engineered for mechanical, HVAC, piping, and design engineers in compliance with international standards (ISO, DIN, EN, ASME, ASHRAE). Load the interactive tool for real-time calculations and automated reports.

DIN 28011 (Torispherical) & DIN 28013 (Ellipsoidal) Dished Head Geometry Chart

Crown radius (R), knuckle radius (r), inside dish depth (h₂), blank diameter (Da), and internal volume formulas.

Dished Head StandardCrown Radius RKnuckle Radius rDish Depth h₂Blank Diameter DaInternal Volume Formula
DIN 28011 (Klöpper Torispherical)R = 1.0 × Dr = 0.10 × Dh₂ ≈ 0.1935 × DDa ≈ 1.09 × D + 2·h₁V ≈ 0.100 × D³
DIN 28013 (Korbbogen Deep Dish)R = 0.8 × Dr = 0.154 × Dh₂ ≈ 0.255 × DDa ≈ 1.15 × D + 2·h₁V ≈ 0.130 × D³
ASME 2:1 Ellipsoidal HeadR ≈ 0.9 × Dr ≈ 0.17 × Dh₂ = 0.250 × DDa ≈ 1.21 × D + 2·h₁V ≈ 0.131 × D³
Hemispherical HeadR = 0.5 × Dr = 0.50 × Dh₂ = 0.500 × DDa ≈ 1.57 × DV = 0.262 × D³

Frequently Asked Questions (FAQ)

How is the blank flat diameter calculated for a torispherical head?

The blank flat diameter is calculated from the crown radius (R), knuckle radius (r), straight flange (h1) and wall thickness using standard empirical forming formulas.