What is the difference between DIN 471 and DIN 472?
DIN 471 applies to external retaining rings fitted onto cylindrical shafts, whereas DIN 472 applies to internal circlips fitted inside housing bores.
Find external shaft circlip (DIN 471) and internal bore retaining ring (DIN 472) groove diameter, groove width and allowable thrust load.
Engineered for mechanical, HVAC, piping, and design engineers in compliance with international standards (ISO, DIN, EN, ASME, ASHRAE). Load the interactive tool for real-time calculations and automated reports.
Standard retaining ring thickness (s), groove width (m H13), and groove diameter (d₂) by nominal diameter.
| Nominal Dia d₁ (mm) | Ring Thickness s (mm) | Groove Width m H13 (mm) | DIN 471 Shaft Groove d₂ (mm) | DIN 472 Bore Groove d₂ (mm) |
|---|---|---|---|---|
| 15 | 1.00 | 1.10 | 14.3 | 15.7 |
| 20 | 1.20 | 1.30 | 19.0 | 21.0 |
| 25 | 1.20 | 1.30 | 23.9 | 26.2 |
| 30 | 1.50 | 1.60 | 28.6 | 31.4 |
| 40 | 1.75 | 1.85 | 37.5 | 42.5 |
| 50 | 2.00 | 2.15 | 47.0 | 53.0 |
| 60 | 2.00 | 2.15 | 57.0 | 63.0 |
DIN 471 applies to external retaining rings fitted onto cylindrical shafts, whereas DIN 472 applies to internal circlips fitted inside housing bores.