How to Read Thermodynamic Steam Tables (Table A-4, A-5, A-6 & A-17)

Complete guide to Yunus Çengel Thermodynamic Property Tables: saturated water (Table A-4 & A-5), superheated steam (Table A-6), quality x, double interpolation, and Rankine cycle analysis.

✍️ Emre Cevahir Korkmaz (Mechanical Engineer) 📅 2026-08-31 ⏱️ 8 min read

Reading thermodynamic property tables and performing linear interpolation accurately is fundamental to solving energy systems, power plant, and refrigeration cycles. Based on the SI property tables in Yunus A. Çengel & Michael A. Boles (*Thermodynamics: An Engineering Approach*), this guide covers Table A-4, Table A-5, Table A-6, Table A-11/A-12 (R-134a), and Table A-17 (Ideal Gas Air).


1. Key Thermodynamic Properties and Subscripts

  • T: Temperature (°C or K)
  • P: Pressure (kPa, bar, or MPa) [1 bar = 100 kPa = 0.1 MPa]
  • v: Specific Volume (m³/kg)
  • u: Specific Internal Energy (kJ/kg)
  • h: Specific Enthalpy (kJ/kg) [h = u + P·v]
  • s: Specific Entropy (kJ/kg·K)
  • x: Vapor Quality / Dryness Fraction (0 ≤ x ≤ 1)

Subscripts:

  • f (saturated liquid): Property of saturated liquid at x = 0 (vf, hf, sf)
  • g (saturated vapor): Property of saturated vapor at x = 1 (vg, hg, sg)
  • fg (evaporation difference): yfg = yg - yf (e.g., latent heat of vaporization hfg = hg - hf)

2. Phase Determination Decision Tree

  • Given Temperature (T) and Pressure (P): Look up Tsat at pressure P in Table A-5:
  • T < Tsat: Compressed (Subcooled) Liquid
  • T = Tsat: Saturated Liquid-Vapor Mixture (0 ≤ x ≤ 1)
  • T > Tsat: Superheated Vapor (use Table A-6)
  • Given P (or T) and y (v, u, h, or s): Compare y against yf and yg:
  • y < yf: Compressed Liquid
  • yf ≤ y ≤ yg: Saturated Mixture with quality x = (y - yf) / yfg
  • y > yg: Superheated Vapor

3. Instant Solution with Our Interactive Steam Tables Solver

Instead of spending 15 minutes performing manual double interpolations across pressure blocks, use our Thermodynamic Steam Tables & Property Solver to compute exact properties, view step-by-step interpolation formulas, and pin cycle states (State 1, 2, 3, 4) for automatic Rankine and refrigeration Δh analysis.