Steel Hollow Section, Plate & Beam Weight Calculation Guide

Formulas and standard unit weight charts (kg/m) for square/rectangular hollow sections (HSS), steel plates, round bars, and IPE/HEA structural beams.

✍️ Emre Cevahir Korkmaz (Mechanical Engineer) 📅 2026-09-12 ⏱️ 4 min read

Accurate bill-of-materials (BOM) weight estimation is critical for structural steel fabrication, machine frame design, and procurement costing.

1. Fundamental Steel Weight Formula

Using standard carbon steel density ρ = 7.85 g/cm³ (7,850 kg/m³):

Mass (kg) = Cross-Sectional Area (mm²) × Length (m) × 0.00785

2. Quick Shop-Floor Formulas

  • Steel Plate Weight (kg): Width (m) × Length (m) × Thickness (mm) × 7.85
  • Solid Round Bar (kg/m): d² × 0.006165 (where d is diameter in mm)
  • Rectangular Hollow Section (kg/m): 2 × (H + B - 2t) × t × 0.00785

Compute exact weights and section properties for boxes, pipes, plates, and beams with our Steel Section & Plate Weight Calculator.